Norton 6342K2 Hands-Free Low Energy Door Operator Kit – Push Or Pull Side Mount
In stock
SKU
6342K2
4.8
Usually Ships Next Day
×
Transit time is determined by shipping method and destination. Most orders will ship via FedEx or UPS Ground. If an item is out of stock or will require significant lead time we will contact you. Same-Day shipping cutoff time is 12:00 pm EST. Please see our Shipping Info page for more details. You can also CHAT WITH US to determine Shipping Estimates for your specific Items
$3,630.60
Quick Overview
- Push and pull side mounting
- Non-handed
- Door Width (single or pair): min 36″, max 48″
- Door Weight: 200 lbs.
- Overall Length: 39 5/8″
Secured and trusted checkout with
Norton 6342K2 Hands-Free Low Energy Door Operator Kit – Push Or Pull Side Mount
The Norton 6342K2 Low Energy Operator offers a broad set of intelligent functions, such as latch boost, latch retraction, and obstruction detection to safely secure a variety of moderate to high traffic openings. A unique design with one of the slimmest profiles available allows the 6300 to blend more seamlessly with the frame while fitting challenging applications with minimal header space. A modular design and simple controls also make for easy installation and setup.
Features:
- Activated by push button, hands-free and RF devices
- Maximum door size: 200 lbs. at 48" wide
- Aesthetically pleasing, slim profile
- Modular design
- Adjustable opening force
- Adjustable closing power
- Wi-Fi Interface
- 2 year limited warranty
6342K2 (39 5/8") Kit Includes:
- Operator
- Cover
- Push and Pull Arms
- 2 700 Wave-to-Open Switches
Electrical Data:
- Power input 120 VAC, 3A, 60Hz
- Current draw 1.5A
- Power output 24VDC @ 1.3A max draw (less accessories)
Certifications:
- ANSI/BHMA A156.19 certified
- UL325/991 certified
- UL10C listed for positive pressure fire test
- Complies with requirements for the Americans with Disabilities Act (A.D.A)
- Manufactured in an ISO 9001 and ISO 14001 certified facility
| UPC | 722208647848 |
|---|---|
| Specifications | Door Control (interior) (exterior) closing force shall be adjustable to ensure adequate closing control. Door Operator shall simulate conventional door closer opening and closing forces unless the power operator motor is activated. Door Operator shall have electronic backcheck to cushion the door speed if door is opened violently. [(Door Operator shall be AUTOMATICALLY ACTIVATED by either a slight push or pull in the direction of opening swing - Push and Go.) (Door Operator shall be SELECTIVELY ACTIVATED by external initiating device, i.e. wall switch, etc.) (Door Operator shall be both AUTOMATICALLY ACTIVATED and SELECTIVELY ACTIVATED.)] Operator shall have selectable power close to provide additional closing force to overcome conditions that may prevent door from latching. Unit shall have delay switches for motor activation, electric lock interfacing, and hold open time. Units shall interface with latch assist exit devices or similar products and have 24VDC @ 1.3A maximum (less accessories) output for connection of electric strike, lock, radio frequency receiver, etc. Unit shall have a three-position Selector Mode Switch that will permit the unit to be switched "ON" to monitor for function inputs, switch to "H/O" for infinite hold open function or switched "OFF" which will disable function inputs allowing unit to be used as a manual door closer. Unit shall be U.L. Listed for automatic closing door. The Unit shall be adjustable to provide compliance with the requirements of the Americans with Disabilities Act (ADA). Unit shall be certified by BHMA to meet A156.19 requirements. Unit shall meet UL325/991, UL10C standards. |
See more about Norton 6342K2 here