Chat with us, powered by LiveChat

Discounts on Bulk Orders! Chat with us today!

Corbin Russwin CL3180 Passage Lever x Blank Plate

Usually Ships Next Day
In stock
Quick Overview
  • Grade 1 Lever Lockset
  • Fits Most Standard Door Preps
  • For High Traffic Areas
List Price: $636.00
Our Price:
As low as $350.44

Secured and trusted checkout with

Corbin Russwin CL3180 Passage Lever x Blank Plate

Manufactured with the highest quality materials, the Corbin Russwin CL3100 Series, Grade 1 Lever Locks guarantee strength, reliability and quiet operation. Available in all standard architectural finishes, the CL3100 series subtly complements any high-use commercial, industrial and institutional application.

Designed to meet the current increase in security needs, the CL3300 series offers several key features. All functions feature the Lever Release™ design for vandal resistance, allowing the outside lever to rotate when in the locked position. The Corbin Russwin CL3100 Series* follows a higher standard for Grade 1 bored locks. The unique T-Zone construction provides strength and toughness by true interlocking between the lockbody and the latch, far surpassing the ANSI/BHMA A156.2 Series 4000 Grade 1 standards.


  • Deadlocking latchbolt by lever.
  • Lever on one side; blank plate on other side.
  • Lever always free.
  • For single or double communicating doors.


  • Withstands 3000 inch pounds of torque applied to the locked lever without gaining access.
  • Solid cast levers without plastic fillers. Outside lever handles shall be a minimum of 4-5/8" (117mm) in length and shall provide a minimum of 2" (51mm) clearance from the surface of the door to the inside of the lever at the midpoint. Outside lever handles may return to within 1/2" (13mm) of the door surface. Levers on keyed locksets shall be removable only when the designated key is in the cylinder.
  • Fit a standard 2-1/8" (55mm) bore without the use of thru-bolts. Standard rose size shall be 3-1/2" (89mm) in diameter.
  • Latchbolt head shall be one piece stainless steel. Latchbolt assembly shall be encased within the lock body.
  • Locksets required for fire doors shall be listed by UL for ratings of A label (3 hours) and less, for doors up to 4'0" (1.2m) x 10'0" (3m) and pairs of doors 8'0" (2.4m) x 10'0" (3m). A 3/4" (19mm) throw Latchbolt for pairs of fire doors shall be standard.
  • Locksets shall be cycle tested per ANSI/BHMA A156.2, to eight (8) million cycles without any visible lever sag.
More Information
Backset: 2-3/4" standard
Latchbolt: Stainless steel bolt 7/8" (22mm) diameter x 1/2" (13mm) throw
Strike: ANSI curved lip 4-7/8" x 1-1/4" x 1-1/4" lip to center
Door Thickness: 1-3/4" - 2" standard
Handing: Non-handed
Door Prep: ANSI/BHMA A156.115 (161)
Lock Chassis: Steel, zinc dichromated for corrosion resistance
Bearing Assembly: Cast and machined stainless steel
Front: Wrought brass or stainless steel, 2-1/4" (57mm) x 1-1/8" (29mm). Accommodates flat front doors and doors beveled 1/8" (3mm) in 2" (51mm).
Function ANSI: F111
Levers: Secured with 6 lobe security set screw standard
Roses: Brass

Exceeds ANSI/BHMA A156.2 Series 4000, Grade 1

UL and cUL listed to Canadian safety standards

UL-cUL listed for 3 Hour doors

All levers conform to ADA requirements for barrier free accessibility

Meets UL 10C and UBC 7-2

UL Listed: ANSI/SDI-BHMA A250.13;ANSI/ASTM E330-2002

ANSI/ASTM 31886-2005 & ASTM 31996-1009

UL Certification Directory ZHEM.R21744 Latching Hardware

Listed on Florida Building Code Website: FL4351-R1

Meets ANSI A117.1 Accessibility Code.

California State Reference Code (formerly Title 19, Cal. State Fire Marshal Standard)


0% of 100
Write Your Own Review
You're reviewing:Corbin Russwin CL3180 Passage Lever x Blank Plate
Your Rating